Od 1964. MEP dizajnira i proizvodi pile za rezanje metala vrhunske kvalitete u standardnim i custom verzijama za ručnu, poluautomatsku i potpuno automatsku primjenu.

Više od 150.000 strojeva proizvedenih u tvornici koja se proteže na 13.000 m2 instalirano je širom cijelog svijeta na svih pet kontinenata.

NUDIMO:

• TRAČNE PILE (SERIJA SHARK),
• VERTIKALNE PILE ZA METAL (SERIJA TIGER),
• CIRKULARNE PILE ZA METAL (SERIJA WILLY & FALCON)
• CIRKULARNE PILE ZA ALUMINIJ (SERIJA COBRA)
• SERVIS I DOBAVU REZERVNIH DIJELOVA

NAJPRODAVANIJI MODELI PO KATEGORIJAMA:

MANUALNE PILE: Model Shark 281

SHARK 281, manual band sawing machine to cut from 0° to 60° left. The vice on the pneumatic versions (MA) opens and closes by means of a manually operated valve (or by means of a footpedal which is instead optional). A FEW FEATURES: Electric panel (wiring totally identifiable, stand-by, loose-key safety switch, main switch, pole change switch, emergency stop, motor magneto-thermal overload, minimum tension coil, protection against missing phase, low tension safety device (LTSD 24 V).- IP55 control handle.

POLU-AUTOMATSKE PILE: Model Shark 332 SXI EVO

SHARK 332 SXI evo, semi-automatic electro-hydraulic sawing machine , with operation also in manual and semi-automatic dynamic cycle, for cutting from 45° right to 60° left. Machine with controlled single axis microprocessor with the latest generation of controllers for semi-automa- tic sawing machines designed by MEP. Semi-automatic cycle: starting the cycle: – the vice closes and the motor starts – the head goes down to execute cut – motor stops – head returns to top position and vice opens.

AUTOMATSKE PILE: Model Shark 332 NC 5.0

SHARK 332 NC 5.0, electrohydraulic band sawing machine with multimicroprocessor which can operate in automatic, semi-automatic, semi-automatic/dynamic and manual mode. Automatic cycle (to cut from 0° to 60° left). Semi-automatic, semi-automatic/dynamic and manual cycle (for cuts from 45° right to 60° left). CNC machine with a new controller : MEP 50 with Windows “CE” based. This new PLC has been specifically designed by MEP for the automation of its range of products.

DOUBLE-COLUMN PILE: Model Shark 230 NC 5.0

SHARK 230 NC HS 5.0, electrohydraulic automatic double-column bandsaw for 0° cuts on profiles and solid parts in structural, stainless and alloy steels, with restpiece which cannot be fed in automatic of 60 mm. It cuts dimensions up to 230×230 mm and can operate also in semi-automatic cycle. CNC machine with controlled double axis so as to obtain, on the same bar, 1000 different lots each of different lengths and quantities.CNC machine with a new controller : MEP 50 with Windows “CE” based.